haier XQSB60-JN - Manual (Page 13)

Program
common
Quick
Posthaste
Jean
Standard
Cotton
Silk
Gentle
Program selection button
Following automatic programs are available for selection
Washing the relatively big and thick laundries
Standard water saving washing
Washing the cotton textiles
Washing the silk textiles
Washing for laundries with particularity
care
Fast efficient washing for common laundries
Super quick wash of the laundry under 1
kg with light soil
11
Push the spin button to set
the spin procedure.
During common, jean,
standard programs,
push the spin button to set
different spin time (from 0
to 9 minutes)
During cotton , silk
programs, push the spin
button to select spin
procedure, but the spin time
cannot change.
During quick ,posthaste
gentle programs, push the
spin button, the machine
have no reaction.
Spin button
Power On/Off button
Push the POWER button to switch
on the power.
When the power is on, push it
again to switch off the power.
Push the POWER button to switch
on the power.
If the start/pause button is not
pushed, the washing machine will
automatically switch off the power
after 5 minutes.
During sensing, it displays --
During reserve procedure, it displays the remained reserve time (in
hours)
During operation of programs, it displays the remained time (minutes).
If the remained time exceeds99 minutes, it adopts A at tens place to
represent 100 minutes, b to represent 110 minutes. For instance, A3
represents103 minutes.
In case of abcommon phenomenon, it displays
the abcommon symbol (see to Page 16)
Page16
Reserve/remain time indicator digitron
Water level button
The washing machine can detect the laundries
automatically. After detection, it will set the water
level to suitable value among 4, 6, 8,and A
automatically.
You can also set water level by yourself. After the
machine is started, it will not set water level
automatically. You shall push the start/pause
button to make new setting.
If there's water inside the tub, the machine cannot
detect the laundries and will display water level 6 .
If wet laundries are put in, it may display water level
10 . You must set suitable water level by yourself.
If posthaste program is selected, it will display
water level 3 . When water level 1 is reached in
water filling, it will perform washing while filling
water. When water level 3 is reached, it
will change to common washing.
During operation of wash and rinse program, you
can push down the water level button to add water.
When you release the button, or it reaches the
overflow water level, the machine will stop adding
water.
The water level decided may be different from actual
value because of the different moisture level of the
laundries.
Reserve button
Start/Pause button
After the power is switched on, push it to
start the machine
During working, push it to pause working.
During pause, push it to resume working.
Push this button can select washing closing time
range of choice for 2 ~ 24 hours.
After reservation starts up after hold "RESERVE "
button by hand can display reserving status.
SPIN WATER LEVEL RESERVE PROGRAM
Time remained
(minutes)
Reserve
(hours later)
STANDARD
COTTON
SILK
QUICK
POSTHASTE
JEAN GENTLE
COMMON
START
PAUSE POWER
ON/OFF
Common washing
Applicable situation