HP 2524 - Manual (Page 10)

[no] page
Toggles the paging mode for display commands so that the “—more –“ will appear
or not appear.
repeat
Repeatedly executes the previous command until a key is pressed.
vlan <vlan-name | vlan-id>
Enters the VLAN interface configuration context for the VLAN.
2.2 Diagnostic Commands
boot [system [flash <primary|secondary>]]
Performs cold reboot of switch.
write terminal
This command displays the running configuration.
write memory
This command saves the running configuration to Flash.
erase startup-config
Deletes the configuration stored in flash so that the switch will reverted to it’s
default configuration upon reboot.
erase flash <primary|secondary>
Deletes the configuration stored in flash so that the switch will reverted to it’s
default configuration upon reboot.
copy tftp <startup-config|flash> <ip-addr> <remote-file>
[primary|secondary]
Retrieves a configuration or OS file on the remote host, and overwrites the switch's
corresponding file with the remote file.
6