Basic working techniques, Changing the hedge trimmer angle, Safety instructions – Husqvarna 325HDA55 User Manual
Page 10
10 –
English
SAFETY INSTRUCTIONS
•
Always wear heavy-duty gloves when repairing the cutting
attachment. This is extremely sharp and can easily cause
cuts.
•
Store the machine out of reach of children.
•
Use only original spare parts for repairs.
Basic working techniques
•
Work with a swinging action from the bottom upwards
when trimming sides.
•
Adjust the throttle setting to suit the load.
•
When trimming a hedge the engine should always face
away from the hedge.
•
Hold the machine as close to your body as possible to get
the best balance.
•
Make sure that the tip does not touch the ground.
•
Do not rush the work, but work steadily until all the
branches have been cut back cleanly.
Changing the hedge trimmer angle
(325HE3,325HE4)
•
Undo the knob.
•
Grasp the handle on the angle stop, adjust to the desired
angle and then tighten the knob.
(325HDA55)
•
Undo the knob.
•
Press the cutting head against the ground or some other
solid object until the desired angle has been obtained.
•
Tighten the knob.
!
WARNING! Do not hold the cutting head
when you adjust the angle. The blades are
sharp and you could easily cut yourself.