Hunter Fan 34257 - Manual (Page 9)

41786-01 08/04/2005 9 ©2005 HUNTER FAN CO.
ENGLISH
1. Set the Lower Reservoir on the flat,
hard surface you have chosen.
2. Attach the Upper Reservoir to the
Lower Reservoir by engaging the two
tabs on the sides. See Figure 14.
Figure 14
3. Place the Atomizer in the Upper
Reservoir, aligning the three oval holes in
the Atomizer with the three prongs in the
Upper Reservoir. The side of the Atomizer
with three short posts should be facing
upward. See Figure 15.
Figure 15
4. Assemble the Pump Cap and the
Funnel Pump by aligning the arrows on
both components and inserting the Funnel
Pump into the Pump Cap. Twist the Fun-
nel Pump counter-clockwise until the two
components snap together. See fi gures 16a
and 16b.
Figure 16a
Figure 16b
Reassembly of Humidifi er Parts
continued
Lower
Reservoir
Water Tank
Tank Cap
Upper
Reservoir
Tab
Atomizer
Power Pack
Atomizer
Posts
Pump Cap
Funnel
Pump
Funnel
Pump
Arrows
Pump
Cap
41786-01/-02_rev 08.01.05.indd 9 8/4/05, 4:05:44 PM