Operation – Homelite UT10947D User Manual

Page 12

Advertising
background image

Page 12

Fig. 14

FULL CHOKE

CHOKE LEVER

HALF CHOKE

RUN POSITION

Fig. 15

THROTTLE TRIGGER

THROTTLE

LOCK BUTTON

TRIGGER

RELEASE

Fig. 16

Fig. 17

THROTTLE TRIGGER

TRIGGER

RELEASE

Fig. 18

RUN POSITION

STARTER

GRIP

STARTING A COLD ENGINE:

3. Move the chain brake to the BRAKE position.

Note: Set the chain brake by pushing the chain brake
lever/hand guard forward (towards the bar), to the
brake position. Refer to “Operation – Operating Chain
Brake” for additional information.

4. Set the ignition switch to the RUN (I) position.
5. Fully press and release the PRIMER BULB 7 times.
6. Pull CHOKE lever all the way OUT to full position.
7. Engage trigger release.

While squeezing both the trigger release and throttle
trigger, push in the throttle lock button. Release the
throttle trigger. This latches the trigger for starting.

OPERATION

Advertising