Controls, Control locations – Husqvarna 966582201 User Manual
Page 17
ContRoLs
17
This operator’s manual describes the Husqvarna Zero
Turn Rider. The rider is fitted with a Briggs & Stratton
19 HP* four-stroke overhead valve engine.
Transmission from the engine is made via belt-driven
hydraulic pumps. Using the left and right steering
controls, the flow is regulated and thereby the
direction and speed.
Cutting height handle
1.
Park brake
2.
Throttle / choke control
3.
Ignition switch
4.
Motion control levers
5.
Blade control lever
6.
Fuel tank cap
7.
Fuel shut off valve
8.
Bypass linkage
9.
Control Locations
1
2
3
4
5
6
8
9
7
8058-070-1
*The power rating of the engines indicated is the average
net power output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard
J1349/ISO1585. Mass production engines may differ from
this value. Actual power output for the engine installed
in the final machine will depend on the operating speed,
environmental conditions and other variables.