Changing a flat tire – HONDA 2010 Accord Sedan User Manual
Page 357
Advertising
Take the jack out of the tool kit
case.
Loosen each wheel nut 1/2 turn
with the wheel nut wrench.
Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.
6.
7.
8.
Changing a Flat Tire
354
JACKING POINT
JACK
WHEEL NUT
2010 Accord Sedan
Advertising
This manual is related to the following products: