Hayter Mowers Harrier 48 48ST - Manual (Page 39)

485101MT210999A
PROBLEM POSSIBLE FAULT REMEDY
Uneven cut Undulating ground conditions Change direction of travel
Cutterbar worn Sharpen the cutterbar
Cutterbar out of balance Balance the cutterbar
Wheels / roller damaged Inspect and replace as necessary
Discharge chute blocks Grass is wet Mow dry grass
Cut height too low Increase cut height
Grassbag full Empty grassbag
Slow engine speed Increase engine speed
Airflow through the Clean the grassbag
grassbag is restricted
Mower is hard to push Cut height too low Increase cut height
Wheels / roller damaged Inspect and lubricate or replace
as necessary
Mower will not self propel Clutch out of adjustment Adjust clutch cable
Drive belt damaged Replace drive belt
Poor grass collection Airflow through the Clean the grassbag
grassbag is restricted
Discharge chute blocked Remove blockage
Slow engine speed Increase engine speed
Wet grass Mow dry grass
Grassbag full Empty grassbag
FAULT FINDING 1.37 1.37
FAULT FINDING Continued.