Switch ports per server blade enclosure, Switch physical and environmental – HP GbE2 User Manual
Page 21
21
Switch ports per server blade enclosure
•
Eight external 10/100/1000T (C-GbE2) or 1000SX (F-GbE2) Gigabit Ethernet ports on a hot-pluggable rear-mounted
interconnect module
•
Four external 10/100/1000T Gigabit Ethernet ports on switch front panels
•
Two external DB-9 serial ports on switch front panels (one per switch)
•
32 internal 10/100/1000 Gigabit Ethernet ports to server blade network adapters (4 per server bay)
•
Two internal 10/100/1000 Gigabit Ethernet inter-switch crosslinks for switch to switch communication and failover
scenarios
•
10 gigabit fabric for future layer 7 switching and 10 Gigabit Ethernet uplink cpability
•
16 BL20p G2 Fibre Channel pass-though signals (with GbE2 Storage Connectivity Kit)
•
I
2
C Switch to management module communications
•
All external Ethernet ports may be used for data, switch and iLO management, and/or PXE remote configuration.
•
All internal Ethernet signals routed as Ethernet across individual CAT5e signal traces
•
12 RJ-45 (C-GbE2) or 8 LC fiber and 4 RJ-45 (F-GbE2) external Ethernet port connectors
•
16 pluggable, small form factor external slots for Fibre Channel port connectors (with GbE2 Storage Connectivity Kit)
Switch physical and environmental
•
AC power input (at server blade system level)
•
Direct facility -48 DC power input
•
81 Typical and 113 maximum power consumption per switch (watts)
•
Local front power reset/power cycle button on each switch
•
Remote reset/power cycle via user interface
•
10 to 35 operating and -30 to 60 storage temperature (Celsius)
•
20% to 80% operating and 5% to 95% storage relative humidity
•
FCC Class A, ICES-003 Class A, AS/NZS 3548 Class A, and VCCI Class A electromagnetic interference (EMI) certifications
•
UL/CUL and CE safety certifications
•
12.0 pounds per interconnect switch and interconnect module