Harbor Freight Tools CENTRAL PNEUMATIC 90590 - Manual (Page 6)

SKU 90590 PAGE 6
INSPECTION, MAINTENANCE, AND CLEANING
1. Before each use, inspect the general condition of the Air Regulator. loose
connections and joints, cracked, or broken parts, excessively worn air supply
hose, and any other condition that may affect the safe and proper operation of the
Regulator. If a problem occurs, have the problem corrected before further use.
Do not use damaged equipment.
2. When cleaning, use only water and a mild detergent. Do not immersed in liquid.
Do not use cleaners that are combustible or corrosive.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTUER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PROD-
UCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF
REPLACEMENT PARTS THERETO.
7. When finished painting, turn off the air compressor. Squeeze the trigger of the
spray gun for several seconds to release all compressed air from the system.
Then, disconnect the air supply hose from the Air Regulator.
(See Figure A.)