HONDA EM3800SX - Manual (Page 63)

61
Wheel Kit Installation
TORQUE:
AXLE
WHEEL (2)
8 16 mm FLANGE BOLT (4)
GENERATOR
SIDE
8 16 mm FLANGE BOLT (4)
4.0 30 mm COTTER PIN (2) STAND (2)
20 mm WASHER (2)
LONGER
8 mm FLANGE NUT (4)
Install the two wheels on the axle shaft using the washers and cotter
pins.
Install the axle assembly on the generator using four 8 16 mm
flange bolts and 8 mm flange nuts.
Install the two stands on the under frame using four 8 16 mm
flange bolts.
17 22 lbf·ft (24 29 N·m , 2.4 3.0 kgf·m)
1.
2.
3.
07/11/07 10:29:44 31Z21600_062