Hotpoint DDP-700 - Manual (Page 22)

MODEL NAME
D DP-7 00
USER GUIDE
PAGE
This will set Internal call (call from other registered handset) ring melody.
1. Press up to select
HANDSET
menu.
2. Press
3. Press to select INT RING .
4. Press . The handset will ring the current INT melody setting. The default is melody 5.
5. Press to select 1,2,3,4 and 5 different melody tones.
6. Press . A confirmation tone is heard.
7. Press to exit INT MELODY or repeat step 2 to 5 to change INT melody again.
8. Press and hold to exit handset programming mode and return to standby mode.
Handset ring melody for internal call
1. Press up to select BASE menu.
2. Press .
3. Press to select RINGER
4. Press .
5. Press to select
VOLUME
.
6 Press . The Base will ring the current ring volume setting. The default is VOLUME 5.
7. Press to select Volume off (VOL OFF), 1,2,3,4 and 5 level. Level 5 is the maximum.
8. Press . A confirmation tone is heard.
9. Press to exit RING VOLUME or repeat step 4 to 8 to change base ring volume again.
10 Press and hold exit base ring programming and return to standby mode.
Base ring volume
This will set Incoming call (call from PSTN) ring volume.
PERSONALIZED YOUR SETTING
19