Havis-Shields KK-K9-D22-K - Manual (Page 9)

KK-K9-D22-K_INST_9-07
10. Mount door panels:
• Center so edges do not hang over.
• Attach top lip of door panel to vehicles door
using #10 x ¾” Stainless flat head screws. Be
sure to use a 5/32” pilot and wax screw.
• Proceed to mount remainder of door panel.
• Starting at the top and working your way
down, pre-drill w/ 5/32” drill bit and attach to
door using #10 x ¾” Stainless sheet metal
screws.
Note: Starting at the top and working your way
down will insure a clean tight fit to the door.
Note: apply wax to screws to avoid screw head from snapping.
Final Door Panel
Installation
Note: Product is painted black for Demo purposes only. Product is shipped unpainted
Door Panel
Installation