Hunter Fan HUNTER Ceiling Fans - Manual (Page 12)

12
Hunter Fan Company 42400-01 • 09/26/05
13
42400-01 • 09/26/05 Hunter Fan Company
7 • Completing Your Installation With or Without a Light Fixture (Continued)
Installing the Glass Bowl
1. First install two medium base (A19) incandescent bulbs (60
Watt maximum each).
2. Attach the extra pull chain (included) to the fan pull chain
using the plastic breakaway connector. (You may fi nd the
plastic breakaway connector on the end of the extra chain.)
3.  read the fan pull chain through the hole in the metal disk.
 en, thread the fan pull chain through the hole in the center
of the glass bowl.
4.  read the light pull chain through the hole in the center of
the glass bowl.
5. Place the cover plate up against the glass bowl. Align the holes
in the cover plate and glass bowl.
6.  read the fan pull chain and light pull chain through the
appropriate holes in the cover plate.
7.  read the light pull chain through the fi nial and screw the
fi nial onto the threaded rod end until tight.
Breakaway
Connector
Metal Disk
Light Pull Chain
Glass Bowl
Cover Plate
Finial