Drive clutch cable adjustment, Servicing your lawn mower 41 – HONDA HARMONY HRB216TDA User Manual
Page 43
Advertising
SERVICING YOUR LAWN MOWER
41
Drive Clutch Cable Adjustment
1. Measure free play at the top of the lever, as shown. Free play
should be 1/16 ~ 3/16 in (1 ~ 5 mm). If adjustment is necessary:
2. Loosen the lock nuts with a 10 mm wrench, and move the adjuster
up or down as required.
3. Tighten the lock nuts and recheck free play.
4. Start the engine outdoors, and operate the drive clutch lever.
Check that the drive clutch engages and releases properly.
If the drive clutch does not operate as it should, with correct cable
adjustment, take the mower to an authorized Honda servicing
dealer for repair.
1/16 ~ 3/16 in
(1 ~ 5 mm)
DRIVE CLUTCH LEVER
LOCK
NUTS
ADJUSTER
Advertising