HP MediaSmart SLC3760N - Manual (Page 30)

18 HP MediaSmart HDTV User’s Guide
2 Skip this step if you are using a wired network
connection. Attach the two wireless network
antennas to the TV wireless antenna connectors by
screwing each antenna into place.
3 Connect power to the TV; see “Connecting power
to the TV” on page 18.
4 Turn on the TV; see “Turning the TV On and Off
(Standby)” on page 21.
Connecting power to the TV
Use these steps to attach the cable clamp, bundle
cords with the cable clamp and the cable tie, and
connect the AC power cord.
1 Locate the AC power cord, the cable clamp, and
the cable tie from the box.
2 Connect the power cord to the TV.
AC power cord
Cable clamp
Cable tie