Connecting power supply, Firmly plug the power cord's plug into the outlet, Ac inlet connector of the power cord – Hitachi CP-X268AWF User Manual
Page 24: Setting up, Aux i/o dc 5v 0.5a
15
Connecting power supply
WARNING
ŹPlease use extra caution when connecting the power cord, as
LQFRUUHFWRUIDXOW\FRQQHFWLRQVPD\UHVXOWLQ¿UHDQGRUHOHFWULFDOVKRFN
• Only use the power cord that came with the projector. If it is damaged, contact
your dealer to newly get correct one.
• Only plug the power cord into an outlet rated for use with the power cord's
VSHFL¿HGYROWDJHUDQJH
• Never modify the power cord. Never attempt to defeat the ground connection
of the three-pronged plug.
1.
Connect the connector of the power cord to the AC inlet of the projector.
2.
Firmly plug the power cord's plug into the outlet.
C
R
/P
R
C
B
/P
B
AUDIO IN
2
AUDIO IN
1
RGB IN
1
RGB IN
2
SD CARD
AUX I/O
DC 5V
0.5A
LAN
CONTR
OL
RGB OUT
AUDIO OUT
USB
VIDEO
S-VIDEO
AC
IN
Setting up
AC inlet
Connector
of the power cord