HP Photosmart A530 Series - Manual (Page 19)

To print multiple photos
1. Load appropriate paper for current print job. For more information, see
Load your
paper .
2. Navigate through the photos on the inserted memory card.
3. Press Print.
4. Press or to browse to the next photo you want to print. You do not have to wait
for the first photo to finish printing.
NOTE: To print additional copies of the current image, press Print again.
To print camera-selected photos
1. Load appropriate paper for current print job. For more information, see
Load your
paper .
2. Insert a memory card that contains camera-selected (DPOF) photos.
3. Select Yes when the printer asks you whether you want to print the camera-selected
photos, and then press Print.
NOTE: To print additional copies of the current image, press Print again.
Remove a memory card
CAUTION: Do not pull out the memory card while the memory card light is flashing.
A flashing light means the printer or computer is accessing the memory card. Wait
until the light remains solid. Removing a memory card while it is being accessed may
corrupt information on the card or damage the printer and card.
To remove a memory card
▲ When the memory card light on the printer is solid, it is safe to pull the card out of the
slot.
Print from a PictBridge-certified camera or device
This section describes the procedure for printing from a PictBridge digital camera. The
procedure for printing from other PictBridge devices—such as camera phones and other
image capture devices—is very similar. Review the documentation that came with your
PictBridge device for specific information.
NOTE: If you disconnect the camera while printing, all print jobs are cancelled.
To print using a PictBridge-certified camera
1. Load HP Advanced Photo Paper into the printer.
2. Turn on the PictBridge-certified digital camera.
Print from a PictBridge-certified camera or device 17