Hunter Fan 41949-01 - Manual (Page 10)

41949-01 02/12/2008
10
B27
E1
Go to step
on page 17
to attach grille.
B22
I
Connect wiring harness. DO NOT ALLOW THE MOTOR TO
HANG FROM THE WIRING HARNESS.
I
B23
Reinstall the motor by inserting the tabs and pushing up into
position. Make sure the wires are not pinched
between the motor and the housing.
B25
Turn on the power source.
ON
OFF
B26
B24
J
Test the motor. If the motor does not run,
check the plug connection.
Secure the motor by tightening the 2 screws.
011_41949_EngS_2-12-08.indd 10 2/12/08 2:43:46 PM