HoMedics BPA-200 - Manual (Page 14)

DATE & TIME SET PROCEDURE
1. To adjust the date/time, press the Set button
,
located on the back of the monitor.
2. The display will show a blinking number showing
the hour. Change the hour by pressing the
button. Each press will increase the number by one
in a cycling manner. Press the Set button
again
to confirm the entry, and the screen will show a
blinking number representing the minutes.
3. Change the time and date as described in Step 2
above, using the button to change the
numbers and the Set button to confirm the
entries.
4. A “0” will reappear as the blood pressure monitor is
ready for measurement again.
13
Press the button
blinking hour
increasing hour
confirm the entry
repeat process to set time and date