Halo Lighting System LZR214 User Manual

Lazer, By halo

Advertising
background image

335

TRACK

LIGHTING

System

COOPER LIGHTING

NOTE: Unless otherwise stated, Lazer
connectors are not compatible with Halo
Miniature Power-Trac.

C O N N E C T O R S ( F o r u s e w i t h L a z e r Tr a c k O n l y )

LAZER

BY HALO

®

LZR200

Live End Feed with Junction
Box Cover

For starting a track run at beginning of
track and when connector is mounted to
a junction box.

Finishes: White (P), Black (MB)

LZR201

Live End Feed

For starting a track run at beginning of track.

Finishes: White (P), Black (MB)

LZR203

Adjustable “L” and Straight
Connector Feed

To connect two track sections at right angles
or straight end-to-end. Includes straight and
right angle covers.

Finishes: White (P), Black (MB)

LZR205

Conduit Continuation Feed

Includes one left feed and one right feed
to continue a run around obstructions.
Requires 1/2” trade size fitting (not included).

Finishes: White (P), Black (MB)

LZR208

Cord and Plug Feed

10’ three-wire cord with grounded plug.
Maximum capacity 5 AMPS.

Finishes: White (P), Black (MB)

LZR212

Mini Connector

For joining two track sections end-to-end.
LZR212 is not an electrical feed.

Finishes: White (P), Black (MB)

LZR214

X Connector

For joining four track sections in an X pattern.
Can be used as electrical feed point.

Finishes: White (P), Black (MB)

DE112

Dead End

Replacement Dead end for Lazer Track ( 6
included).

Finishes: White (P), Black (MB)

LZR202

Floating Canopy and
Connector Feed

Track can be connected to existing outlet
box located anywhere along the track.
Comes with canopy cover, connector,
dead end and mounting hardware.

Finishes: White (P), Black (MB)

LZR204

Conduit Adapter Feed

Designed to accept 1/2” trade size conduit
fitting (not supplied). Use when feeding
to track through surface conduit system.

Finishes: White (P), Black (MB)

LZR206

T-Bar Canopy

For installing track on T-Bar ceilings.
LZR201 or LZR203 also required.

Finish: White (P)

LZR211

Flexible Connector Feed

To connect two track sections at any angle
up to 90° or for connecting wall and ceiling
mounted track. Can be used as electrical
feed point.

Finishes: White (P), Black (MB)

LZR213R

Right Handed T Connector

LZR213L

Left Handed T Connector

To connect three track sections. Can be used as
electrical feed point.

Finishes: White (P), Black (MB)

Advertising
This manual is related to the following products: