Heartland 2602 User Manual
Page 9
8
CONNECTING POWER TO THE CABINET
COMBINATION AND ELECTRIC SELF CLEAN OR STANDARD STOVES ONLY
(SEE NEXT PAGE FOR GAS STOVES)
After your exhaust hood has been installed the very last thing to do is to connect the multipin
plug to the range. The receptacle is located at the rear of the stove by the main power cord.
When installing the multi-pin plugs,
make sure the flat sided pins are
aligned with flat sided holes. Each plug
is coded for proper fit. Do not force
plug into receptacle.
Insert themulti-pin plugs into correspond-
ing receptacles- each plug is coded to
match its receptacle.
Loop power cord on back and attach
power cord to stove back with supplied
cable tie and screw
Plug the stove into wall receptacle.
Check all electrical functions of the
cabinet (fan,light, clock, etc.) and check
againthat ALL screws have been tight-
ened before completeing the installa-
tion.
Exhaust Hood Recptacle Locations
5200, 5210,
6200, 6210,
4200, 4210,
8200, 8210,
Back of
stove
Back of
stove