Hitachi CR 18DL - Manual (Page 12)

12
English
2. Battery Charger (UC18YRL) Overheat lamp (green)
Nameplate
Caution plate
Body
Fig. 2
Battery installation hole
Cooling fan
Charge status lamp (red)
SPECIFICATIONS
1. Cordless Reciprocating Saw (CR18DL)
Motor DC motor
No-Load Speed 0 – 2100/min.
Stroke 1-1/8" (28 mm)
Capacity Mild Steel Pipe: O.D. 3-1/2" (90 mm)
Vinyl Chloride Pipe: O.D. 3-1/2" (90 mm)
Wood:
Depth 3-1/2" (90 mm)
Model EBM 1830
Type Lithium – ion battery
Battery Voltage DC 18V
Charging & discharging
about 1,300 times
frequency
Weight 7.5 lbs. (3.4 kg)
NOTE: The charging time may vary according to ambient temperature and power source
voltage.
2. Battery Charger
Model UC18YRL
Input power source Single phase: AC120V 60Hz
Charging time
Approx. 45 min
(At a temperture of 68°F (20°C))
Charging voltage DC 7.2 – 18V
Charging current DC 3.5A
Weight 1.3 lbs. (0.6 kg)