HP R725 User Manual
Page 43
The lens cover is stuck and won't move when I turn the power on and off.
●
If the lens cover is stuck open, turn the camera over and tap firmly on the top of the
camera to free the lens cover.
●
If the lens cover is stuck closed, turn the camera over and tap firmly on the bottom
of the camera to free the lens cover.
●
If the lens cover is still stuck, use a finger to carefully move the lens cover.
My image is blurry.
●
).
●
Use a tripod to hold the camera steady, or improve lighting conditions.
●
Set the camera to Macro,
Auto Macro, Normal, or
Infinity focus and
try taking the picture again (see
Using the focus range settings on page 14
●
Set the flash to
Auto Flash or Flash On and set the shooting mode to
Action.
●
Check Image Advice for specific tips (see Image Advice under
).
My image is too bright.
●
).
●
Move back from the subject and use zoom.
●
Adjust Exposure Compensation (see Exposure Compensation under
●
Use Bracketing for exposure (see Bracketing under
).
●
Check Image Advice for specific tips (see Image Advice under
).
My image is too dark.
●
Wait for natural lighting conditions to improve, use the flash (see
) or add indirect lighting.
●
Adjust Exposure Compensation (see Exposure Compensation under
●
Use Bracketing for exposure (see Bracketing under
).
●
Use Adaptive Lighting (see Adaptive Lighting under
).
●
Use the Spot setting for AE Metering (see AE Metering under
).
●
Check Image Advice for specific tips (see Image Advice under
).
My image is grainy.
●
Use a lower ISO Speed setting (see ISO Speed under
).
●
Add indirect lighting, use the flash (see
), or wait for
natural lighting conditions to improve.
HP Photosmart R725/R727 Digital Camera
43