Hayes Microcomputer Products ADSL Ethernet Modem - Manual (Page 17)

13
b b b b The following field appears:
Virtual Circuit
Accept the default, which is 0.
cccc Click Update and repeat Steps 1b – 1d above.
When the modem connects, you are ready to explore the
Internet.
If and when you want to use your modem for online gaming,
continue on page 16.
If neither AutoPPP nor AutoBridge turns up a match for your
provider’s settings, follow the instructions below.
Locating and Entering DSL Settings Manually If
AutoConfiguration Did Not Work
The DSL Internet Settings Tables beginning on page 74 show
the settings for the most commonly encountered service providers
in the US and many other countries.
If there is more than one setting for your service provider, the
most common is labeled (1), the next most common is labeled (2),
and so on.
1 1 1 1 Go to the table on page 74 and find your service provider on
the list. If you are in the US and your service provider is not on
the list, follow the instructions using the settings for Service
Provider Not Shown at the bottom of the table.
2 2 2 2 On the ADSL Ethernet’s Basic Setup page (shown on the
next page), select your Service Provider’s most often used
protocol – labeled (1) in the DSL Internet Settings Tables –
from the list. The screen may change slightly, depending on the
protocol you select.