Hitachi VT-FX601A - Manual (Page 20)

PRESET FOR USE - 20 -
The channels you no longer receive or seldom watch can be deleted from the memory.
(Of course, you can add the deleted channel into the memory again.)
Make sure...
• You must use the remote control for this procedure.
• VCR power must be turned on.
• Turn on the TV and set the TV channel to the same video output channel as located
on the back of the VCR. (CH 3 or 4)
• Press VCR/TV button so that the VCR/TV indicator on the VCR comes on.
1 Select "INITIALIZE"
Press MENU button repeatedly so that the INITIALIZE menu appears.
2 Select "CHANNEL SET UP"
Confirm "CHANNEL SET UP" is pointed.
Then, press F.FWD/ button.
INITIALIZE
CHANNEL SET UP
SETTING CLOCK
LANGUAGE SELECT
3 Select "ADD/DELETE CH"
Press PLAY/ or STOP/ button repeatedly to point to "ADD/DELETE CH".
Then, press F.FWD/ button.
CHANNEL SET UP
TV
[ON]
CATV
ADD/DELETE CH
4 Enter the desired channel number
Press the number buttons or PLAY/ or STOP/ button repeatedly until your desired
channel number appears. (Example: CH02)
ADD/DELETE CH