Hearth and Home Technologies CL36D - Manual (Page 23)

02-02 23 12538 Rev D
CL36D AND CR36D INSTALLATION INSTRUCTIONS
Figure 21 - Installing a TR344 Round Termination Cap
Figure 22 - Installing a TR342 Round
Telescoping Termination Cap
2. Chase Top
Construct a chase of desired materials maintaining
a minimum 2” air space around the chimney.
3. Termination Cap
a. Install the chimney sections up through the chase
enclosure. When using a TR344 round
termination cap, the uppermost top section of
pipe must extend 6” above the top of the chase
collar to allow installation of the storm collar and
termination cap. See Figure 21.
b. For installations utilizing a TR342 telescoping
round termination cap, the uppermost chimney
section must be below the top of the chase top,
but not more than 14½” below the top of the chase
top flashing collar. See Figure 22.