Operation - al550, Al550, Loading the power chair – Harmar Mobility AL500 User Manual

Page 17: Operation

Advertising
background image

ON

DOWN

UP

THREE WAYS TO VERIFY YOUR CHAIR

IS SUCCESSFULLY LOCKED DOWN

1) AUDIBLE "CLICK or POP" SOUND

3) REVERSE TEST

2) VISUAL INDICATOR

SLOW

NOT
LOCKED

LOCKED

The yellow indicator will extend and stay
extended when the chair is successfully
locked in place.

Attempt to back the chair off the platform.
The chair will NOT move in any direction
when successfully locked.

As the chair enters the locking device,
it should be driven forward until an audible
pop or clicking sound is heard. This sound
is the locking device setting itself around
the chair's docking device pin.

AFTER ALL THREE
TESTS ARE PERFORMED
Raise platform until motor's
clicking noise is heard

Your chair is now ready
for transport. Remove key
if desired.

1

2

3

4

5

Insert and turn key.
Press down on switch
to lower platform.

Continue to lower as
platform automatically
unfolds. Stop when
platform reaches ground.

Slowly drive chair
unto platform as
shown.

TEST LOCKING DEVICE

LOADING THE POWER CHAIR

AL550

OPERATION

17

Advertising