HTC LZC5227 / 965879701 - Manual (Page 30)

OPERATION
30 - Husqvarna
When the engine starts, immediately release 10.
the ignition key back to the run position.
IMPORTANT INFORMATION
Do not run the starter for more than 5 seconds
each time. If the engine does not start, wait
about 10 seconds before retrying.
8011-743
Return to run position
Set the desired engine speed with the throttle. 12.
Allow the engine to run at a moderate speed,
“half throttle”, for 3-5 minutes before loading
it too heavily. USE FULL THROTTLE WHEN
MOWING
(no choke).
8011-754
Set the engine speed
8011-508
Press in the choke control
Push the choke control in gradually when the 11.
engine has started.
WARNING!
Engine exhaust and certain vehicle
components contain or emit
chemicals considered to cause
cancer, birth defects or other
reproductive system damage. The
engine exhaust contains carbon
monoxide, which is a odorless,
colorless, poisonous gas. Do not use
the machine in enclosed spaces.