HP M527 - Manual (Page 31)

7 Using the Setup Menu
The Setup Menu allows you to set preferences for the camera’s behavior.
1.
While in Live View or Playback, press , then use to highlight .
2. Use to highlight a menu option, then press to display the menu option’s
sub-menu.
3. Use to highlight a setting, then press .
4. To exit the Setup Menu, press .
Settings you specify remain until you change them.
Display Brightness—Adjusts the brightness of the Image Display.
●
Low—For extending battery life.
● Medium (Default)—For normal viewing conditions.
● High—For very bright lighting conditions.
Camera Sounds—Turns the camera sounds (such as button presses and
shutter clicks) off and on.
On (Default), Off.
Date & Time—Sets the date and time. See Set the date and time on page 8 .
USB Configuration—Specifies how a computer recognizes the camera. See
Connecting to the computer on page 26 .
● Digital Camera (Default)—Recognizes the camera as a digital camera
using PTP (Picture Transfer Protocol).
● Disk Drive—Recognizes the camera as a disk drive using MSDC (Mass
Storage Device Class).
TV Configuration—Sets the video signal format for displaying camera
images on a TV.
●
NTSC—Used primarily in North America, parts of South America, Japan,
Korea, and Taiwan.
● PAL—Used primarily in Europe, Uruguay, Paraguay, Argentina, and
parts of Asia.
(Language)—Sets the language. See Choose the language
on page 7 .
HP Photosmart M527 Digital Camera 31