Husqvarna 170BT - Manual (Page 5)

English
5
For safe operation and maintenance, symbols are carved in
relief on the machine. Using to these indications, please be
careful not to make a mistake.
(a) The port to refuel the "MIX GASOLINE"
Position: FUEL TANK CAP
(b) The direction to close the choke
Position: INTAKE CUP
(c) The direction to open the choke
Position: INTAKE CUP
(d) The direction to stop the engine
Position: THROTTLE LEVER [170 BT only]
∗1 : THE YEAR WILL BE CHANGED EVERY YEAR OF
MANUFACTURING.
∗2 : THE INITIAL NUMBER WILL BE CHANGED EVERY YEAR
OF MANUFACTURING.
This engine label certifies that the product is certified in
accordance with American exhaust emissions requirements
EPA Ph II and CARB Tier II. The Emissions Compliance Period
referred to on the emissions Compliance label indicates the
number of operating hours for which the engine has been shown
to meet Federal and California emission requirements.
Category C = 50 hours, B = 125 hours, and A = 300 hours.
For customer assistance call: 704-921-7000 or contact us at our
website: www.husqvarna.com
WARNING
1. Read this Blower Operator Manual carefully. Be sure you
understand how to operate this unit properly before you
use it. Failure to do so could result in serious injury.
2. Be sure to keep this manual handy
so that you may refer to it later
whenever any questions arise. Also
note that you are requested to
contact the dealer from whom you
purchased the product for
assistance the event that you have
any questions which cannot be
answered herein.
3. Always be sure to include this manual when selling,
lending, or otherwise transferring the ownership of this
product.
4. Do not lend or rent your machine without the owner's
manul.
5. Be sure that anyone using your unit understands the
information contained in this manual.
6. Never let a child use the machine.
7. Long-term exposure to noise can result in permanent
hearing impairment. So always use approved hearing
protection.
8. Under no circumstances may the design of the machine
be modified without the permission of the manufacturer.
Always use genuine accessories. Non-authorized
modifications and/or accessories can result in serious
personal injury or the death of the operator or others.
9. A blower is a dangerous tool if used carelessly or
incorrectly and can cause serious, even fatal injuries. It
is extremely important that you read and understand the
contents of this Operator’s manual.
10. Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify
the design and appearance of products without prior
notice.
11. The machine is only designed for blowing lawns,
pathways, asphalt roads and the like.
(d) (a) (b) (c)
IMPORTANT ENGINE INFORMATION
THIS ENGINE MEETS U.S. EPA PH2 AND 2006
∗
1
CALIFORNIA EMISSION REGULATIONS FOR SI
SORE’s COMPLIANCE PERIOD : CATEGORY A
ENGINE FAMILY : 6KZXS.0725PQ ; EM
∗
2
ENGINE DISPLACEMENT : 65cc
REFER TO OWNER’S MANUAL FOR MAINTE-
NANCE SPECIFICATIONS AND ADJUSTMENTS.
U.S. PATENT NO.
170BT/170BF
6.112.708 6.298.811 6.289.856
Safety Precautions
Symbols on the machine