Humax IR-PLUS - Manual (Page 25)

**
4.4 Setting Property of Service
You can add the current service to Favourite group. In addition, you
can lock, unlock, skip, or delete the current service while watching a
programme and select the smartcard. The operation is as follows:
1. Press the OK button while watching a programme. The service list
will appear on the screen.
You can also display the service list using the MENU-SELECT
SERVICE-SIMPLE (or ADVANCED).
2. Press the MENU button while the service list is displayed.
3. Select your desired item (Favourites/Lock or
Unlock/Skip/Delete/Smartcard) using the button, and press
the OK or button.
4. After setting property of a service, press the OK button to save the
changes.
Note:
•
This setting may vary according to the type of the receiver.
• In case of unlocking a service, you will be prompted to enter your Pin Code. The default Pin Code is ”1234”.
• When switching to the locked service, you should enter the Pin Code to view the service.
• You will not be allowed to watch the skipped service by using the CH-/CH+ button. However, you can watch the skipped service
using the NUMERICAL button or Service List.
• For detailed information about how to register Favourite Service for the whole services, refer to 5. Service List.
GB 24