Husqvarna FS 6500 - Manual (Page 16)

16
If the saw is leading to the right, turn the
adjustment nut COUNTER-CLOCKWISE. If the
saw is leading to the left, turn the adjustment nut
CLOCKWISE. Retighten axle mount bolts
securely after making adjustment.
DO NOT FORCE ADJUSTMENT!
5. Incidents During Operation
WARNING: Before inspecting or
performing any maintenance, ALWAYS
locate the machine on a level surface with
the engine / motor OFF, and the start
switch in the OFF position, and the power
source disconnected.
6. Maintenance
WARNING: Before performing any
maintenance, ALWAYS locate the
machine on a level surface with the
engine / motor OFF, and the start switch in
the OFF position, and the power source
disconnected.
Change Engine Oil: Change
engine oil after every 50 hours of
operation.
Engine Oil Type
Under normal operating conditions use SAE
10W30 API service classification SF or SG.
See engine operation manual for other
recommended oil types.
7. Accessories
For information contact your local dealer or
call our Toll free Customer Service
Telephone number shown on the front cover:
8. Repairs
We carry out all repairs in the shortest
possible time and at the most economical
prices. See front cover for our address and
telephone numbers.
9. Spare Parts
For a quick supply of spare parts it is
essential to quote the data shown on the
Serial Number Plate fixed to the machine.
Make note of this information & the purchase
date below, and on the front cover of this
document for quick reference:
Model:
____________
_
Serial No:
____________
_ Date:
____________
_
10. Engine Governor Settings
FS 3800 (37 HP VG4D)
Engine Governor Settings
Fig. B
LOAD
RPM
NO
LOAD
RPM HOLE
NUMBER
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400 1550
1650
1725
1850
1950
2050
2125
2250
2350
2425
2550 4
5
5
6
7
8
8
9
10
10
11
VG4D Governor
Lever Detail