Husqvarna 335LX - Manual (Page 3)

CONTENTS
English – 3
Contents Note the f ollowing before starting:
Please read the oper ator’s manual carefully.
KEY TO SYMBOLS
Symbols .................................................................... 2
CONTENTS
Contents .................................................................... 3
Note the following before starting: ............................. 3
INTR ODUCTION
Dear Customer , ......................................................... 4
WHA T IS WHAT?
What is what on the clear ing saw? ............................ 5
GENERAL SAFETY PRECA UTIONS
Impor tant ................................................................... 6
Personal protective equipment .................................. 6
Machine
′
s safety equipment ...................................... 7
Cutting equipment ..................................................... 10
ASSEMBL Y
Fitting the loop handle ............................................... 11
Assembling the cutting equipment ............................ 11
FUEL HANDLING
Fuel saf ety ................................................................. 12
Fuel ........................................................................... 12
Fuelling ...................................................................... 13
ST ARTING AND STOPPING
Chec k before starting ................................................ 14
Starting and stopping ................................................ 14
W ORKING TECHNIQUES
Gener al working instructions ..................................... 16
MAINTENANCE
Carb urettor ................................................................ 18
Muffler ....................................................................... 19
Cooling system .......................................................... 20
Bevel gear ................................................................. 20
Air filter ...................................................................... 20
Spark plug ................................................................. 21
Maintenance schedule .............................................. 22
TECHNICAL D ATA
T echnical data ........................................................... 23
EC-declaration of conformity ..................................... 24
!
W ARNING! Long-term exposure to noise
can result in permanent hearing
impairment. So always use approved
hearing protection.
!
W ARNING! Under no circumstances may
the design of the machine be modified
without the permission of the manufacturer.
Always use genuine accessories. Non-
authorized modifications and/or
accessories can result in serious personal
injury or the death of the operator or others.
!
W ARNING! A clearing saw, brushcutter or
trimmer can be dangerous if used
incorrectly or carelessly, and can cause
serious or fatal injury to the operator or
others. It is extremely important that you
read and understand the contents of this
operator’s manual.