Solve device management problems, Embedded web server cannot be opened – HP Officejet 6000 User Manual
Page 104
Media is not coming out correctly
•
Make sure the output tray extension is extended; otherwise, printed pages may fall
off the device.
•
Remove excess media from the output tray. There is a limit to the number of sheets
the tray can hold.
Pages are skewing
•
Make sure the media loaded in the trays is aligned to the paper guides. If needed,
pull out the trays from the device and reload the media properly, making sure that the
paper guides are properly aligned.
•
Make sure the duplexer is properly installed.
•
Load media into the device only when it is not printing.
Multiple pages are being picked up
•
Fan the media before loading.
•
Make sure the paper guides are set to the correct markings in the tray for the media
size you are loading. Also make sure the guides are snug, but not tight, against the
stack.
•
Make sure the tray is not overloaded with paper.
•
Use HP media for optimum performance and efficiency.
Solve device management problems
This section provide solutions to common problems that involve managing the device.
This section contains the following topic:
•
Embedded Web server cannot be opened
Embedded Web server cannot be opened
Check your network setup
•
Make sure you are not using a phone cord or a cross cable to connect the device to
the network. For more information, see
Configure the device (Windows)
•
Make sure the network cable is securely connected to the device.
•
Make sure the network hub, switch, or router is turned on and working properly.
Chapter 5
100
Maintain and troubleshoot