The product prints meaningless characters, Nothing happens when i try to print – HP Officejet 6000 User Manual

Page 77

Advertising
background image

The product prints meaningless characters

Try the following solutions to resolve the issue. Solutions are listed in order, with the most
likely solution first. If the first solution does not solve the problem, continue trying the
remaining solutions until the issue is resolved.

Solution 1: Restart the product

Solution 2: Print a previously saved version of the document

Solution 1: Restart the product

Solution: Turn off the product and your computer for 60 seconds, then turn them
both on and try printing again.
Cause: There was no available memory in the product.
If this did not solve the issue, try the next solution.

Solution 2: Print a previously saved version of the document

Solution: Try printing another document from the same software application. If this
works, then try printing a previously saved version of the document that is not corrupt.
Cause: The document was corrupt.

Nothing happens when I try to print

Try the following solutions to resolve the issue. Solutions are listed in order, with the most
likely solution first. If the first solution does not solve the problem, continue trying the
remaining solutions until the issue is resolved.

Solution 1: Turn on the product

Solution 2: Load paper in the input tray

Solution 3: Select the correct printer

Solution 4: Check the printer driver status

Solution 5: Wait until the product completes the current operation

Solution 6: Remove all cancelled print jobs from the queue

Solution 7: Clear the paper jam

Solution 8: Make sure the print carriage can move freely

Solution 9: Check the connection from the product to your computer

Solution 10: Restart the product

Solution 1: Turn on the product

Solution: Look at the Power light located on the product. If it is not lit, the product
is turned off. Make sure the power cord is firmly connected to the product and plugged
into a power outlet. Press the Power button to turn on the product.
Cause: The product was turned off.
If this did not solve the issue, try the next solution.

Print troubleshooting

73

Advertising