Havis-Shields 1996-2008 Crown Victoria Swing-Out Dash Monitor Mount S-DMM-XXX-CV-SO - Manual

1
S-DMM-XXX-CV-SO_INST_3-08a
INSTALL INSTRUCTIONS S-DMM-XXX-CV-SO
1996-2008 CROWN VICTORIA
SWING-OUT DASH MONITOR MOUNT
• Ratchet Wrenches
• Sockets - 7mm, 7/16”, 9/16”
• Open End Wrenches - 7/16”, 9/16”
• Phillips Screwdriver
• T-20 Torx Driver
• AM/FM (DIN) Removal Tool
TOOLS REQUIRED:
QTY: DESCRIPTION: PART #:
1 3/8”-16 x 1 Hex Bolt GSM33028B
2 3/8” Flat Washer GSM31007B
1 3/8” Nylock Nut GSM30018B
4 1/4-20 Hex Flange Serrated Nut GSM30023
1 3/8” Self Adhesive Loom Clip GSM20032
1 6” Wire Tie GSM20034
1 Monitor Adapter Hardware Varies (monitor specifi c)
HARDWARE:
Always!
• Read all instructions before installing any Havis-Shields Equipment Corp products.
• Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
• Use hardware provided with install kit
• For product support: visit the Install Instructions Section of our website at
http://havis.com/Installation/Installation.html, email [email protected]
or call 1-800-524-9900.
LINE DRAWING:
**Does not work on 2008 Police Package Crown Vic with optional CD player**
This instruction
shows installation of a
Data-911 computer