Horizon Fitness CE4.1 - Manual (Page 11)

BEFORE YOU
BEGIN
ASSEMBL
Y
11
INTRODUCTION
ELLIPTICAL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
IMPORT
ANT
PRECAUTIONS
ASSEMBLY STEP 5
A) Open HARDWARE BAG FOR STEP 5 (contents on next page).
B) Slide SPACER (H) into LOWER LINK ARM.
C) Place TEFLON WASHERS (I) on either side of SPACER (H). While holding TEFLON WASHERS (I) slide LOWER
LINK ARM into bottom end of LOWER HANDLEBAR.
D) Insert BOLT (J) into LOWER HANDLEBAR and secure using NUT (K).
E) Attach the OUTSIDE ELBOW COVER to elbow joint using 1 SCREW (L).
F) Snap the INSIDE ELBOW COVER onto the OUTSIDE ELBOW COVER.
Note the position of the snap tabs before snapping into position.
G) Repeat on other side.
INSIDE
ELBOW COVER
OUTSIDE
ELBOW COVER
SCREW (L)
LOWER HANDLEBAR
GUIDE RAIL
TEFLON WASHERS (H)
LOWER HANDLEBAR
NUT (E) BOLT (F)
LOWER LINK ARM
SPACER (G)
LOWER LINK ARM
SPACER
TEFLON WASHERS
LOWER
HANDLEBAR
GUIDE RAIL
TEFLON WASHERS (I)
LOWER HANDLEBAR
NUT (K)
BOLT (J)
LOWER LINK ARM
SPACER (H)
LOWER LINK ARM
SPACER
TEFLON WASHERS
LOWER
HANDLEBAR
GUIDE RAIL
TEFLON WASHERS (I)
LOWER HANDLEBAR
NUT (K)
BOLT (J)
LOWER LINK ARM
SPACER (H)
LOWER LINK ARM
SPACER
TEFLON WASHERS
LOWER
HANDLEBAR