Husqvarna 55 - Manual (Page 37)

English – 37
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level, according to ISO 7182, is calculated as the time-weighted energy total for noise pressure
levels under various working conditions with the following time distribution: 1/3 idling, 1/3 max. load, 1/3 max. speed.
Note 3: Equivalent vibration level, according to ISO 7505, is calculated as the time-weighted energy total for vibration levels under
various working conditions with the following time distribution: 1/3 idling, 1/3 max. load, 1/3 max. speed.
55
Engine
Cylinder displacement, cm
3
53,2
Cylinder bore, mm 46
Stroke, mm 32,0
Idle speed, rpm 2500
Power, kW/ rpm, Europe 2,5/9000
Power, kW/ rpm, Australia 2,5/9000
Ignition system
Manufacturer of ignition system FHP
Type of ignition system ET
Spark plug Champion RCJ 7Y/
NGK BPMR 7A
Electrode gap, mm 0,5
Fuel and lubrication system
Manufacturer of carburettor Zama
Carburettor type C1Q-EL6
Fuel tank capacity, litre 0,6
Oil pump capacity at 9,000 rpm, ml/min 9
Oil tank capacity, litre 0,3
Type of oil pump Automatic
Weight
Chain saw without bar or chain, empty tanks, kg 5,2
Noise emissions
(see note 1)
Sound power level, measured dB(A) 110
Sound power level, guaranteed L
WA
dB(A) 111
Sound levels
(see note 2)
Equivalent sound pressure level at operator’s ear, measured
according to relevant international standards, dB(A)
Europe 103
Australia 103
Vibration levels
(see note 3)
Front handle, m/s
2
4,9
Rear handle, m/s
2
7,2
Chain/bar
Standard bar length, inch/cm 15”/38
Recommended bar lengths, inch/cm 13-20"/33-50
Usable cutting length, inch/cm 12-19"/31-48
Pitch, inch/mm 0,325/8,25
3/8" /9,52
Thickness of drive links, inch/mm 0,050/1,3
0,058/1,5
Type of drive sprocket/number of teeth Rim/7
Chain speed at max. power, m/sec 17,4