Harbor Freight Tools MINI BENCH 4019 - Manual (Page 2)

PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and as-
sembly diagram. Keep your invoice with this manual. Write the invoice number
on the inside of the front cover. Keep this manual and invoice in a safe and dry
place for future reference.
GENERAL SAFETY WARNINGS AND PRECAUTIONS
1. KEEP WORK AREA CLEAN AND DRY. Cluttered, damp, or wet work areas
invite injuries.
2. KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle
this product.
3. STORE IDLE EQUIPMENT. When not in use, tools and equipment should be
stored in a dry location to inhibit rust. Always lock up tools and equipment, and
keep out of reach of children.
4. DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS. Read warning labels on prescriptions to determine if your judgement or
reflexes are impaired while taking drugs. If there is any doubt, do not attempt to
use this product.
SKU 04019 PAGE 2
Item Description
Electrical Requirements 120 Volt / 60 Hz / 65-95 Watts / 1 Amp
Motor: 2 Speed (High, Low)
Motor RPM: 5490 High Speed
Motor RPM: 3850 Low Speed
Spindle RPM Adjustments 130, 200, 350, 560, 920, 1500, 2450, 4000
Chuck Diameter 2-1/2”
Chuck Capacity 2-1/4”
Reverse Jaws Included
Tool Post Capacity Up To 1/2”
Tool Post Style Quick Change
Weight 24 Pounds