Husqvarna 335LX-SERIES 335LS User Manual
Page 3
CONTENTS
English
–
3
Contents
Note the f
ollowing before starting:
Please read the oper
ator’s manual carefully.
Maintenance, replacement, or repair of the emission control
devices and system may be performed by any nonroad
engine repair establishment or individual.
The Emissions Compliance Period referred to on the
emissions compliance label indicates the number of
operating hours for which the engine has shown to meet
Federal and Californian emission requirements.
KEY
TO SYMBOLS
Symbols
.................................................................... 2
CONTENTS
Contents
.................................................................... 3
Note the following before starting: ............................. 3
INTR
ODUCTION
Dear customer!
.......................................................... 4
WHA
T IS WHAT?
What is what on the clear
ing saw? ............................ 5
GENERAL SAFETY PRECA
UTIONS
Impor
tant ................................................................... 6
Personal protective equipment .................................. 6
Machine
′
s safety equipment ...................................... 7
Cutting equipment ..................................................... 10
ASSEMBL
Y
Fitting the loop handle
............................................... 11
Assembling the cutting equipment ............................ 11
FUEL HANDLING
Fuel saf
ety ................................................................. 12
Fuel ........................................................................... 12
Fueling ...................................................................... 13
ST
ARTING AND STOPPING
Chec
k before starting ................................................ 14
Starting and stopping ................................................ 14
W
ORKING TECHNIQUES
Gener
al working instructions ..................................... 16
MAINTENANCE
Carb
uretor ................................................................. 18
Muffler ....................................................................... 19
Cooling system .......................................................... 20
Bevel gear ................................................................. 20
Air filter ...................................................................... 20
Spark plug ................................................................. 21
Maintenance schedule .............................................. 22
TECHNICAL D
ATA
T
echnical data ........................................................... 23
FEDERAL AND CALIFORNIA EMISSIONS
CONTROL WARRANTY STATEMENT
Y
OUR WARRANTY RIGHTS AND OBLIGATIONS ... 24
!
W
ARNING! Long-term exposure to noise
can result in permanent hearing
impairment. So always use approved
hearing protection.
!
W
ARNING! Under no circumstances may
the design of the machine be modified
without the permission of the manufacturer.
Always use genuine accessories. Non-
authorized modifications and/or
accessories can result in serious personal
injury or the death of the operator or others.
Your warranty may not cover damage or
liability caused by the use of non-
authorized accessories or replacement
parts.
!
W
ARNING! A clearing saw, brushcutter or
trimmer can be dangerous if used
incorrectly or carelessly, and can cause
serious or fatal injury to the operator or
others. It is extremely important that you
read and understand the contents of this
operator’s manual.
The engine exhaust from this product
contains chemical known to the State
of California to cause cancer, birth
defects or other reproductive harm.