Hitachi 42EDT41A - Manual (Page 38)

PICTURE
38
ON-SCREEN DISPLA
Y
Color Decoding
Color Management
Green
Blue
Cut Off
Red
Green
Blue
Color Temp. Adjust
Picture
Select Return Set
Day
OK
Red
0
0
0
0
0
0
Amplitude
Color Temp. Adjust
Picture
Select Return On/Off
On
Reset Reset
NOTE: When using Component or DVI-HDTV input, Auto Color will not be available (grayed out).
NOTES: 1. When using Progressive Scan Component or DVI input (Ex. 480p, 720p), Film Mode will not be available (grayed out).
Please see table below for additional information.
2. All Video settings are independent of each other based on it’s input (ANT, AV1~AV4).
The Film Mode function turns ON or OFF the 3:2 PULLDOWN DETECTION SPECIAL FEATURE.
Theatrical movies are shot on film at 24 frames or still pictures per second, instead of 30 frames or 60
fields like video. When film is transferred to video for television viewing, the disparity between the two
frame rates must be reconciled. This involves a process known as 3:2 pulldown.
When Film Mode is turned ON from the VIDEO menu, your Hitachi Plasma Television will activate the
circuitry for this special feature to improve video performance when watching film based sources.
Film Mode
This function will not be available (grayed out).
PAL Comb Filter
Set to adjust the sharpness of the picture signal. LTI
Set to adjust the Sharpness of the Color Signal. CTI
Use this function to enhance the shadow detail in dark scenes. Black Enhancement
The AUTO COLOR function automatically monitors and adjusts the color to maintain constant color levels
even after a program or channel changes. It also maintains natural flesh tones while preserving fidelity
of background colors.
Auto Color
Set to change color temperature depending on preference. Adjust Amplitude to increase/decrease colors
Red, Green, Blue in Brighter scenes. Adjust Cut Off to increase/decrease Red, Green, Blue in Dark
scenes. Color Temp. Adjust
Press CURSOR buttons
̇, ̈ to set to On/Off.
Press CURSOR buttons
̆, ̄ to select color options.
Press the OK button then use the CURSOR buttons ̇, ̈ to adjust settings.
Press the MENU button to exit.