Husqvarna 326HD75 - Manual (Page 19)

English – 19
TECHNICAL DATA
Technical data
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various
working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
Technical data 326HD60 326HD75
Engine
Cylinder volume, cu.in/cm
3
1,55/25,4 1,55/25,4
Cylinder bore, inch/mm 1,34/34 1,34/34
Stroke, inch/mm 1,10/28 1,10/28
Idle speed, rpm 2700 2700
Recommended max. speed, rpm 11000-11700 11000-11700
Max. engine output, acc. to ISO 8893 0,9/9000 0,9/9000
Catalytic converter muffler Yes Yes
Speed-regulated ignition system Yes Yes
Ignition system
Manufacturer/type of ignition system WalbroMB/SEM AM49 WalbroMB/SEM AM49
Spark plug Champion RCJ 6Y Champion RCJ 6Y
Electrode gap, inch/mm 0,02/0,5 0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburettor Zama C1Q Zama C1Q
Fuel tank capacity, US pint/litre 1,0/0,5 1,0/0,5
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 12,6/5,7 13,2/6,0
Sound levels
(see note 1)
Equivalent noise pressure level at the operator’s ear, measured
according to EN/ISO 11806 and ISO 7917, dB(A), min./max.:
98 98
Vibration levels
Vibration levels at handles, measured according to EN/ISO 11806
and ISO 7916, m/s
2
Idle speed, rear/front handles: 2,8/2,8 3,7/3,7
Max. speed, rear/front handles: 5,7/6,4 4,9/4,5
Blades
Type Double sided Double sided
Length, mm 600 735
Blade speed, cuts/min 4695 4695