Hotpoint EG600X - Manual (Page 8)

8
This feature allows you to program the oven and the grill
to:
•
delay start for a specific length of time;
• immediate start for a specific length of time;
• timer.
Button Functions:
: timer - hours and minutes
: cooking time
: end cooking time
-
: set cooking time - backward
+
: set cooking time - forward
How to reset the digital clock.
After the appliance has been connected to the power supply,
or when the power has gone out, the clock display will
automatically reset to 0:00 and begin to flash.
•
Press the and buttons at the same time and
then reset the time (within 4 seconds) using the
-
and
+
buttons.
The
+
button sets the time forward.
The
-
button sets the time backward.
Whenever the time needs to be reset, repeat all of the steps
listed above.
Manual operation of the Oven
After resetting the time, the program automatically switches
to the manual mode.
Note: To reset to manual mode after each “automatic”
cooking, Press the
and buttons at the same time
Preset cooking time with delayed start
The length of the cooking program as well as the time at
which the cooking program ends must be set.
If we assume that the time displayed on the timer is 10:00
1. Turn the function selector to the required cooking mode
and turn the temperature selector to the desired tempe-
rature (e.g. conventional oven, 200°C);
2. Press the button and then set the cooking time
(within four seconds) using the
-
and
+
buttons. Let us
suppose that we set the cooking time at 30 minutes.
The display will read as follows:
A
Release the button and after 4 seconds, the current
time will be displayed again, along with the symbol
and the letter "A" (AUTO);
3. Press the button and then use the
-
and
+
buttons
to set the time for when the cooking program should
end. Let us suppose this time to be 1p.m.
A
4. After the button has been released, the current time will
be displayed after approximately 4 seconds:
A
The letter "A" will light up reminding you that the length
and end cooking time were programmed in automatic mode.
At this point, the oven will turn on automatically at 12:30
and then turn off after 30 minutes. When the oven is turned
on, the symbol will be displayed for the entire cooking
time. At any time during the cooking process, the length of
the cooking time can be displayed by pressing the
button, and the end cooking time by pressing the
button.
At the end of cooking time, a buzzer will sound for
several minutes, to turn it off, simply press any of the
buttons except the
-
and
+
buttons.
Preset cooking time with immediate start
By programming just the duration (points 1 and 2 of the
“Start delayed cooking with preset duration” section),
cooking will start up immediately.
To cancel a preset cooking time
Press the
and buttons at the same time.
Timer Feature
The timer feature allows you to enter a given amount of
time from which the timer begins to count down. This feature
does not turn the oven on or off, it only emits an alarm
when the time has expired.
When the button has been pressed, the display will
read as follows:
Then use the
-
and
+
buttons to set the desired time.
After the button has been released, the timer will start to
count down and the current time will be displayed.
After the time has expired, an alarm will sound, which can
be turned off by pressing any of the buttons (except the
-
and
+
buttons) at this point the symbol will turn off.
Changing and cancellation settings
•
The data entered can be changed at any time by pressing
the corresponding button and the
-
and
+
buttons.
• When the data for the length of the cooking time is
cancelled, the data for the end cooking time are also
cancelled automatically, and vice versa.
• If the oven has been programmed, it will not accept end
cooking times which are before the start of the cooking
process.
KNOW YOUR TIMER