Humminbird 700 series - Manual (Page 86)

76
SI Range
SI Range sets the deepest range that will
displayed in the Side Imaging views. The range must be set manually. The SI
Range menu choice can only be accessed from the Side Imaging Views.
To adjust the SI Range:
1. Highlight SI Range on the Side Imaging X-Press™ Menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or
decrease the SI Range setting. (6 to 360 feet, or 2 to 120 meters
[International Models only], Default = 150 feet, or 50 meters)
Chart Speed
Chart Speed determines the speed at which the
side sonar information moves down the display, and consequently the amount of
detail shown. A faster speed shows more information in the Side Imaging Views
and is preferred by most anglers; however, the sonar information moves across the
display quickly. A slower speed keeps the information on the display longer,
allowing you to see an entire area. Adjust Chart Speed to your personal preference.
To adjust the Chart Speed:
1. Highlight Chart Speed on the Side Imaging X-Press™ Menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or
decrease the Chart Speed setting. (1-9, Ultra, where 1 = Slow, 9 = Fast,
Ultra = Fastest, Default = 5)
SI Colors
SI Colors allows you to select which color palette
you would like to use for the display.
To change the SI Colors:
1. Highlight SI Colors on the Side Imaging X-Press™menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the color
palette. (Inverse, Gray, Brown, Blue, Green, Default = Blue)
531519-1_A - 797c2_Man_Eng.qxp 11/6/2006 5:53 AM Page 76