haier HWM60-15P - Manual (Page 10)

8
Washing sequence
Wash
Spin timer Wash timer Wash selector Buzzer Water-filling entrance
(To set to below 2 minute,
first set to 6 minute then
turn it back. it can increase
the service life of the timer).
(Standard current,
strong current)
(The buzzer will ring when
the washing finishes)
(to set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer).
Overfilling sign
Water-filling selector handle
OFF
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
SPIN WASH
WASH TIMER
1.Water inlet selector
(1) Set the water inlet selector at the "WASH" side.
(Figure 1)
(2) Set the water level adjusting lever to needed line.
2. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 2)
Run washing program for some time to stir and
dissolve the powder completely.
3.Put in the laundries. If the water quantity is
insufficient, please add water.
4.Select the current.
Select the strength of the current according to
the laundries. (Figure 3)
5.Select the washing time
Select the washing time according to the laundries.
(Figure 4)
6.After washing, the buzzer will ring. Set the "WASH
SELECTOR" at "DRAIN". (Figure 5).
WASH TIMER WASH TIMER
STANDARD
STRONG
OFF
BUZZER BUZZER
MAX
OFF OFF
1
2
3
4
5
DRAIN
WASH SELECTOR WASH SELECTOR
SPIN TIMER SPIN TIMER
OFF OFF
12
9
6
3 15
STANDARD
STRONG
DRAIN
WASH SELECTOR WASH SELECTOR
STANDARD
STRONG
DRAIN
WASH SELECTOR WASH SELECTOR