Hubbell Euclid Lifting Magnet Controller 4296 - Manual (Page 2)

Euclid™ Lifting Magnet Controller :: Resistor Type Manual Discharge 4296
Hubbell Industrial Controls, Inc.
A subsidiary of Hubbell Incorporated
4301 Cheyenne Dr., Archdale, NC. 2726 3
Telephone (336) 434-2800 • FAX (336) 434-2803
http://www.hubbell-icd.com
[email protected]
APPROXIMATE DIMENSIONS & WEIGHTS
DO NOT USE FOR CONSTRUCTION PURPOSES
CABINET OUTLINE SIZE 1, 2 & 3 J2M92B
Full Voltage Controllers
SIZE W H D M MW MH NET WT.
1C
1
2
3
16.37"
16.12"
16.12"
19.12" 12.00"
21.90"
21.90"
27.90" 11.00"
10.00"
10.00"
14.25" 14.00
24.25"
24.25"
30.25"
9.50"
11.50"
11.50"
14.50"
12.64"
23.00"
23.00"
29.00"
Consult
Factory
FULL VOLTAGE MANUAL DISCHARGE TYPE
Size
System
Voltage Control
Voltage Magnet
Current
Part
Number
Minimum Cold
Magnet Ohms
Maximum
Cold Magnet
Ohms
1C 300 Max. 12 7.0 - 13 91907-XXX 19.23 32.8
1C 300 Max. 24 7.0 - 13 91907-XXX 19.23 32.8
1C 300 Max. 12 13 - 25 91907-003 10.00 17.7
1C 300 Max. 24 13 - 25 91907-XXX 10.00 17.7
PILOT DEVICES & ACCESSORIES ADDITIONS
FOR MAGNET CONTROLLER
DESCRIPTION PART NUMBER
Type 4212, Cat. No. M-92B, NEMA 1 enclosed Master
Switch (Standard "Lift-Off-Drop").
Type 4211, Catalog No. 4211-1164M/SIFXI "Lift-Drop"
NEMA 1 Flush Mounting Master Switch.
Type 2001, Catalog No. S-N "Lift-Drop" NEMA 1
Maintained/Momentary Surface Mounting Push Button
Station. J2M92B
4211-99848-003
(Consult Factory)
SPARE PARTS KIT (SEE PRICE LIST 1200)
Used With
Magnet Controller
Part Number
Spare Parts Kit
Part Number
Spare Parts Kit Includes:¹
4296-91827-XXX
4296-91907-XXX
4296-91828-XXX
4296-91829-XXX
4296-91830-XXX
59401-410
59401-411
59401-012
1 - Set of Contacts, Springs and
Coil for "Lift" Contactor.
1 - Set of Contacts, Springs and
Coil for "Drop" Contactor.
1 - Polarity Sensing Rectifier.
1 - Auxiliary Contact Assembly for
Drop" or "Lift" Contactor.
¹ Except Size 1 and 2 Controllers. Kit Includes (1) Coil for both lift and drop Contactors.