Changing a flat tire, 2010 accord coupe – HONDA 2010 Accord Coupe User Manual

Page 346

Advertising
background image

CONTINUED

If you have a flat tire while driving,
pull over safely. Drive slowly along
the shoulder until you get to an area
far away from traffic lanes.

Turn on the hazard warning lights,
and turn the ignition switch to the
LOCK (0) position. Have all
passengers get out of the vehicle
while you change the tire.

Take the tool kit out of the trunk.

Unscrew the wing bolt and take
the spare tire out of its well.

Park the vehicle on firm, level, and
non-slippery ground. Put the
transmission in Park (automatic)
or reverse (manual). Apply the
parking brake.

The tools are in the trunk. Open
the trunk and raise the trunk floor
by pulling up the strap.

5.

4.

3.

2.

1.

Changing a Flat Tire

T

a

k

ing
Ca
re

of
th

e

U

ne
x

p

e

c

te

d

343

JACK

SPARE TIRE

TOOL KIT

TRUNK FLOOR

STRAP

The vehicle can easily roll off
the jack, seriously injuring
anyone underneath.

Follow the directions for
changing a tire exactly, and
never get under the vehicle
when it is supported only by the
jack.

09/06/25 20:26:42 31TE0620_348

2010 Accord Coupe

Advertising
This manual is related to the following products: