Assembly step 1, Tools included parts included, Ex-65 – Horizon Fitness Elliptical EX-65 User Manual
Page 4: Ex-75 : ex-55
BEFORE
YOU
BEGIN
6
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE YOU
BEGIN
ASSEMBL
Y
7
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ELLIPTICAL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
'30/545"#*-*;&356#&
#0-5 "
8"4)&3 #
8"4)&3 $
."*/'3".&
ASSEMBLY STEP 1
A) Open
HARDWARE BAG FOR STEP 1.
B) Attach the
FRONT STABILIZER TUBE to the MAIN FRAME using 2 BOLTS (A), 2 WASHERS (B) and 2 WASHERS (C).
BOLT (A)
20 mm
Qty: 2
SPRING WASHER (B)
18 mm
Qty: 2
FLAT WASHER (C)
20 mm
Qty: 2
HARDWARE BAG FOR STEP 1 CONTENTS :
TOOLS INCLUDED
PARTS INCLUDED
c
5mm Allen Wrench
c
6mm Allen Wrench
c
Phillips Screw Driver
c
13/15mm Flat Wrench
c
1 Console
c
1 Console Mast
c
1 Front Stabilizer Tube
c
2 Upper Handlebars
c
2 Lower Handlebars
c
2 Lower Link Arms
c
2 Pivoting Foot Pads
c
2 Elbow Covers
c
2 Handlebar Covers
SPEAKERS (EX-75)
CONSOLE (EX-75 SHOWN)
UPPER HANDLEBAR
MAIN FRAME
LOWER HANDLEBAR
LOWER LINK ARM
FRONT STABILIZER TUBE
PERIMETER BARS (EX-75)
FAN (EX-65, EX-75)
GRIP PULSE
CONSOLE MAST
ACCESSORY TRAY
PIVOTING FOOT PAD
PEDAL ARM
c
6 Hardware Bags
c
2 Front Stabilizer Covers
c
2 Top Side Covers
c
1 Accessory Tray
c
1 Horizon Fitness, 12-Volt Power Supply
c
2 Perimeter Bars
c
6 Hardware Bags
c
3 Stabilizer Covers
c
2 Top Side Covers
c
1 Accessory Tray
c
1 Horizon Fitness, 12-Volt Power Supply
EX-65:
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.
STABILIZER COVER (EX-75)
STABILIZER COVER
WHEEL COVER (EX-65, EX-75)
EX-75:
EX-55:
c
5 Hardware Bags
c
2-piece Top Cap
c
1 Horizon Fitness
6-Volt Power Supply
For a complete exploded diagram, visit us at www.horizonfitness.com
HZ_Ellipticals_Rev.1.5.indd 6-7
8/15/06 2:35:41 PM