Philips FC9015 User Manual
Page 7
Nozzles
Convertible nozzle (specific types only)
The convertible nozzle can be used on either carpets or hard floors.
1
Push the rocker switch on top of the convertible nozzle with your foot to make the brush
strip for cleaning hard floors come out of the nozzle housing (fig. 5).
2
Push the rocker switch again to make brush strip disappear into the convertible nozzle
housing again (fig. 6).
Reach & Clean nozzle (specific types only)
The Reach & Clean nozzle can be used on either carpets or hard floors. When the nozzle is
positioned lengthwise, the suction power is concentrated at the front side of the nozzle.
◗
The nozzle can be turned 360 degrees to 4 different positions, allowing you to also vacuum
clean hard-to-reach places in an easy way (fig. 7).
◗
To adjust the nozzle to the type of floor and the area to be cleaned, put your foot on the
indicated spot and then turn the tube until the nozzle is in the required position (fig. 8).
1
With the nozzle positioned breadthwise and the brush strip folded out, you can clean large
hard floor areas.Turn the tube until the brush strip pops out of the nozzle housing and the
nozzle is positioned breadthwise (fig. 9).
2
With the nozzle positioned lengthwise and the brush strip folded out, you can vacuum clean
small hard floor areas.Turn the tube 90 degrees anti-clockwise until it is positioned
lengthwise with the brush strip still folded out of the nozzle housing (fig. 10).
3
With the nozzle positioned breadthwise and the brush strip folded in, you can vacuum clean
large soft floor areas.Turn the tube 90 degrees anti-clockwise again to position the nozzle
breadthwise and to make the brush strip disappear into the nozzle housing (fig. 11).
4
With the nozzle positioned lengthwise and the brush strip folded in, you can vacuum clean
small soft floor areas.Turn the tube 90 degrees anti-clockwise again until it is positioned
lengthwise with the brush strip still folded in (fig. 12).
Crevice tool and small nozzle
1
Connect the crevice tool (1) or small nozzle (2) directly to the handgrip or to the tube
(fig. 13).
Accessory holder
◗
The accessory holder can simply be snapped onto the handgrip (fig. 14).
◗
The crevice tool and the small nozzle can be stored in the accessory holder by pushing them
into the holder (fig. 15).
Please note the way in which the small nozzle must be placed in the accessory holder.
Using the appliance
Vacuum cleaning
1
Pull the cord out of the appliance and put the mains plug in the wall socket.
2
Switch the appliance on by pushing the on/off button on top of the appliance with your foot.
◗
You can carry the vacuum cleaner by the handle at the front of the appliance.
ENGLISH
7